Identify the customer needs and end-user needs for each of the three products (Consumer, Passive, and Infrastructural) using the tools and methods taught in class (checklist, SMART Requirements Table). Use a similar format to the table attached below.
SMART Requirement Table Template.docxPreview the document
Note: Customer Needs should be written in the SMART requirement format. You need to have the end-user needs in 3 separate tables (10x Consumer Product 5x Passive product 5x Infrastructural Product = 20 end-user needs in total).
my products for
1- Consumer product: electric shaving razor
(10 needs and end-user needs)
2-Passive Product: Water Bottle container
(5 needs and end-user needs)
3- Infrastructural product: sidewalk
(5 needs and end-user needs)
any questions let me know
This should help with the assignment (checklist)
•Geometry
•Kinematics
•Forces
•Energy
•Materials
•Signals
•Safety
•Ergonomics
•Production
•Quality control
•Assembly
•Transport
•Operations
•Maintenance
•Recycling
•Cost
•Schedules
example for a blender( this should help with the assignment above.
#
Category
Requirement Statement
Constraint?
Criterion?
Source?
Rationale?
Test Method
Responsible
1
Safety
The device must not have surfaces hotter than 100 °F andcorners sharper than 0.005″ radius accessible to touch.
Y
N
Sponsor
Violation may cause customer injury and possible law suite
Tactile and visual inspection by team and five potential customers.
Name of Team Member
2
Safety
All moving parts should be shrouded.
N
Y
Team
Moving parts are possible pinch points.
Visual inspection and design review.
Engineer-1
3
Operation
The device must maintain all functionality while subject to a 50 mph wind gust.
Y
N
Team
The device will be deployed in a windy / stormy environment.
First functional prototype will be subject to 50 mph wind.
Engineer-2, Engineer-3
4
Maintenance
All user-serviceable parts should be removable using only an M6 hex-socket on a 18V drill gun.
N
Y
Engr-2
To facilitate removal without tool change.To minimize hardware cost.
Visual inspection, design review.
Engineer-3
5
Transport
The shipping volume of the device must not exceed 450 mm × 300 mm × 140 mm.
Y
N
S&H
Truck volume analysis
Measurement of packaging box with tape measure.
Eng