Finite Element Analysis using Abaqus or ANSYS

      Liquid (water) sloshing in a moving tank is a common phenomenon. The sloshing is a violent resonant fluid motion against tank walls. Such fluctuations lead to amplified forces and momentums that may cause large deformations in the container body. To control such interactions, baffles are introduced in the tank. This study will focus on the effects of different baffles configurations, tank shapes and liquid properties. The parametric study is to conclude on the effects of different parameters and optimize the suitable design to control the sloshing effects. Those are the parameters Tank shapes (circular, elliptical and rectangular) Baffles (1, 2 and 3) Baffles height (15% and 30% of the tank depth) Liquid (water and oil) Tank dimensions can be anything supporting a volume of 1 m3 Similar analysis is available in below link: https://youtu.be/s-lPhfqnNFs Comprehensive report and native files are required by the time of submission. With all above parameters about 36 analyses will be required using either ANSYS or Abaqus Kindly advise if you will be able to perform the Analysis and prepare the report accordingly.