Customer and End-user

Identify the customer needs and end-user needs for each of the three products (Consumer, Passive, and Infrastructural) using the tools and methods taught in class (checklist, SMART Requirements Table). Use a similar format to the table attached below.

SMART Requirement Table Template.docxPreview the document

Note: Customer Needs should be written in the SMART requirement format. You need to have the end-user needs in 3 separate tables (10x Consumer Product 5x Passive product 5x Infrastructural Product = 20 end-user needs in total).

my products for

1- Consumer product: electric shaving razor

(10 needs and end-user needs)

2-Passive Product: Water Bottle container

(5 needs and end-user needs)

3- Infrastructural product: sidewalk

(5 needs and end-user needs)

any questions let me know


This should help with the assignment (checklist)

•Geometry

•Kinematics

•Forces

•Energy

•Materials

•Signals

•Safety

•Ergonomics

•Production

•Quality control

•Assembly

•Transport

•Operations

•Maintenance

•Recycling

•Cost

•Schedules

example for a blender( this should help with the assignment above.

#

Category

Requirement Statement

Constraint?

Criterion?

Source?

Rationale?

Test Method

Responsible

1

Safety

The device must not have surfaces hotter than 100 °F andcorners sharper than 0.005″ radius accessible to touch.

Y

N

Sponsor

Violation may cause customer injury and possible law suite

Tactile and visual inspection by team and five potential customers.

Name of Team Member

2

Safety

All moving parts should be shrouded.

N

Y

Team

Moving parts are possible pinch points.

Visual inspection and design review.

Engineer-1

3

Operation

The device must maintain all functionality while subject to a 50 mph wind gust.

Y

N

Team

The device will be deployed in a windy / stormy environment.

First functional prototype will be subject to 50 mph wind.

Engineer-2, Engineer-3

4

Maintenance

All user-serviceable parts should be removable using only an M6 hex-socket on a 18V drill gun.

N

Y

Engr-2

To facilitate removal without tool change.To minimize hardware cost.

Visual inspection, design review.

Engineer-3

5

Transport

The shipping volume of the device must not exceed 450 mm × 300 mm × 140 mm.

Y

N

S&H

Truck volume analysis

Measurement of packaging box with tape measure.

Eng

This question has been answered.

Get Answer